Thread and needles for Delica beads

Updated November 18, 2026

The beads get all the attention, but the thread and needle decide how a piece feels, how long it lasts and how pleasant it is to stitch. Here is what to use with Delica 11/0 beads, and why.

The two main kinds of thread

Nylon beading thread is a soft, flat or twisted thread made for beadweaving. Miyuki, KO and Nymo are common brands. It is supple, comes in many colors, and gives beadwork a fluid drape. It can stretch a little and fray with wear, so keep your tension even and avoid sawing it back and forth through sharp-edged beads.

Braided thread is a strong, thin line, originally made for fishing, such as FireLine. It barely stretches, and it resists fraying and cutting well. Pieces stitched with it feel firmer and hold their shape. It comes in fewer colors, mostly neutrals such as crystal, smoke and black.

Which one to choose

  • Peyote and brick stitch: either works. Nylon gives a softer piece; braided thread gives a stiffer one that keeps its shape, which suits earrings.
  • Loom weaving: nylon is the usual choice for the warp and weft, in a color close to your beads, because the warp threads can show at the edges.
  • Square stitch and herringbone: the thread passes through each bead several times, so choose a thin thread that still fits on the second and third pass.
  • Fringe: braided thread keeps long strands from twisting and kinking.

If you are not sure, start with a nylon beading thread in a color close to your main bead. It is forgiving and easy to work with.

Thread color

Thread shows between beads, at the edges, and through transparent and lined beads. Match the thread to the color that covers most of the piece, or choose a neutral that blends in: grey or smoke for dark and mixed palettes, white or cream for light ones. With transparent beads, the thread color tints the bead, so test a few beads on a short length first.

Needles

Beading needles are long and thin, with an eye only slightly wider than the shaft, so that they pass through small beads more than once. The higher the number, the thinner the needle.

  • Size 10: sturdy and easier to thread. Good for loom work and for your first pieces.
  • Size 11 or 12: the everyday choice for Delica 11/0 in peyote and brick stitch.
  • Size 13 or finer: for crowded beads in square stitch or herringbone, and for 15/0 beads.

Keep a few spares. Fine needles bend with use, and a bent needle is hard to steer through a row.

Tips for smooth stitching

  • Work with an arm’s length of thread, about 1.5 m (5 ft). Longer lengths tangle and wear out before you reach the end.
  • Stretch nylon thread gently before you start, so that it does not stretch later and loosen the work.
  • Use a thread conditioner or beeswax on nylon thread if it frays or tangles. Braided thread rarely needs it.
  • Let the needle hang now and then, so that the thread untwists.
  • Weave in the ends along the thread path, changing direction a few times, instead of knotting them where they would show. Our guide to adding and ending thread shows how.

Where to go next

Once you have your thread and needle, pick a stitch: peyote, brick stitch, loom beading or square stitch. Our Delica vs seed beads guide explains why we use cylinder beads for all of them.